Type: Class F DMD Prepreg Insulating material
Insulation Grade: F
Color: red
Normal width: 980mm
Conventional thickness: 0.15-0.20mm
DMD Prepreg Insulating material is a soft material formed by F class DMD impregnated epoxy resin and then baked and semi-cured.
Item Unit Requirement
Nominal thickness mm 0.18 0.2 0.23 0.25 0.3 0.4
Thickness tolerance mm 卤0.02 卤0.03 卤0.04
Grammage g/m2 200卤20 240卤28 250卤37 290卤45 380卤53 460卤54
Tensile strength MD no bending N/10mm 鈮?0 鈮?20
Breakdown voltage KV 鈮? 鈮?0
Soluble resin content g/m2 鈮?5
Volatile content % 鈮?.5
Tensile shear strength Mpa 鈮?
Temperature index锛圱I锛? 鈥? 鈮?55
Advantage:
DMD Prepreg Insulating material has strong heat resistance, good dielectric properties and mechanical properties, can be cured at medium temperature, basically no low molecular volatiles are produced during the baking process, and the shrinkage rate is small;
Application:
DMD Prepreg Insulating material Suitable for dry-type transformer copper (aluminum) platinum as winding low-voltage interlayer insulation, as well as the slot insulation and inter-turn insulation of B, F-class motors and electrical appliances.
Notice:
1. During slitting and use, edge gaps and cracks should be prevented to avoid tearing during operation and to avoid surface scratches, oil and dust pollution.
2. Store in an environment below 40鈩? keep clean and dry, away from heat sources, and avoid direct sunlight.
3. The storage period is one year. If it exceeds the storage period, it can still be used if it passes the test according to the technical requirements. Insulation Paper price
website:http://www.insulatingpaper.com/insulation-paper/